75ml Mini Plastic Fuel Tank for TOYAN Four-stroke Engine Models, Model Cars & Ships (Transparent White)

Features:

.Special material, does not react with fuel, heat and shock resistance, and can be used in extreme environments
.Universal accessories are not only suitable for TOYAN engines, but also compatible with other engine models
.Small capacity, low weight, and exquisite design, it is very suitable for use with model parts such as model cars, model ships, and aircraft models
.Make the car have less weight and more acceleration
.Suitable for children over 8 years old

Specifications:

.Color: Transparent White
.Material: Plastic
.Product Weight: 40g
.Package Dimensions: 15 x 10 x 5cm
.Package Weight: 50g
.Packing: OPP Bag

Package Content:

.1 x Oil Tank
--------------------------------------------------------------------
Water Cooled Radiator Cooling Fan Kit for In-line 4-Stroke Gasoline Engine

Features:

.This cooling kit includes water tank, fan, water cooling tube, etc.,
.Suitable for inline four stroke cylinder water cooled gasoline engine model
.The use of the water-cooled heat dissipation kit enables the engine to have good heat dissipation efficiency in operation
.Modified water cooling has the characteristics of better heat dissipation, higher compression ratio. Compared with the same displacement of the air-cooled engine, more power, more fuel saving, and reducing the temperature faster. Extend the working time and service life of the engine
.Exercise your hands-on ability
.Warm Tips: Due to DIY modification accessories, it must be operated with some hand-on ability.
.For over 14 years old

Specifications:

.Color: As Shown
.Material: Metal + Plastic
.Fan Size: 9.5 x 9.5 x 2.5cm
.Radiator Size: 13.3 x 10 x 3.1cm
.Package Dimensions: 13.3 x 10 x 5.6cm
.Product Weight: 250g
.Package Dimensions: 25 x 25 x 15cm
.Package Weight: 280g
.Packing: Bag

Package Content:

.1 x Water Cooled Cooling Kit
--------------------------------------------------------------------
Gasoline Pipe Oil Pipe Kit for In-line Four-cylinder Water-cooled Gasoline Engine Model

Features:

.This kit contains a gasoline pipe and an oil pipe for connecting the engine oil circuit
.For In-line four-cylinder water-cooled gasoline engine model.
.This kit is consumable and can be purchased for spare

Specifications:

.Color: As Shown
.Material: Plastic
.Product Weight: 10g
.Package Dimensions: 10 x 6.5 x 2cm
.Package Weight: 10g
.Packing: Bag

Package Content:

.1 x Gasoline Pipe
.2 x Oil Pipe
--------------------------------------------------------------------
12V-24V 80A Brushless ESC for In-line Four-cylinder Gasoline Engine Model

Features:

.High-quality 80A brushless ESC, suitable for straight four gasoline engines.
.It can also be widely used in various model engines, model airplanes, fans, oil pumps, etc.
.It can be used with a speed regulator, and can be used with a brushless motor and power supply.
.Wiring Mode: One end of the ESC is connected to the starter motor, and the other end is connected to the battery and speed regulator.

Specifications:

.Color: As Shown
.Material: Electronic Components + Plastic
.ESC: 80A
.Power Supply Voltage: 7-24V
Maximum Current: >80A
Recommended Voltage: DC voltage 12V-24V (the positive and negative poles cannot be reversed)
.Socket: Welded 3.5mm banana head
.Product Weight: 81g
.Package Dimensions: 19 x 7 x 2cm
.Package Weight: 81g
.Packing: Bag

Package Content:

.1 x ESC
--------------------------------------------------------------------
Consistency Speed Controler Servo Tester for In-line Four-cylinder Gasoline Engine Model

Features:

.It can easily detect and set the virtual position, jitter and neutral position of the server.
.Two sets of servos or ESCs can be connected
.Single-chip microcomputer control, good stability and high precision.
.Rotate the knob to detect the steering gear.
.If you connect an electronic speed controller (brushed or brushless), you can get rid of the remote control device and adjust the speed manually. It is used to test the performance of the speed controller or motor. It is very practical, and there is no need to connect the remote control and the receiver.
.It is equivalent to the function of a "manual receiver", which simulates the rudder of the transmitter through the knob.
.Note: This product cannot test the servos above 55g, but the ones below 55g can be tested.

Specifications:

.Color: As Shown
.Material: Electronic Components + Plastic
.Output: ≤15mA (5.0)
.Input: DC 4.5-6.0v
.Output Signal: 1.5ms±0.5ms
.Adjustment Mode: Manual, automatic, neutral
.Product Dimensions: 4.25 x 2.4 x 2.35cm
.Product Weight: 7.5g
.Package Dimensions: 11.5 x 7 x 3cm
.Package Weight: 7.5g
.Packing: Bag

Package Content:

.1 x Servo Tester
--------------------------------------------------------------------
CDI High Pressure Pulse Igniter with Two Fire Head Caps for Gasoline Engine Model

Features:

.The CDI igniter adopts high-quality electronic components and manual weld lines for stable ignition, excellent performance and longevity, which is used for various single-cylinder gasoline engine models and distributor-type multi-cylinder gasoline engine models.
.Notes: You need to prepare the battery power supply with a JST plug and connect the engine ignition line by yourself. Please feel free to contact us if you have any questions.

Specifications:

.Material: ABS + Electronic Components
.Type: High Pressure Pulse Igniter
.Input Voltage: 6V-12V
.Output Voltage: 15KV-20KV
.Frequency: 0-15000r/min
.Plug Type: JST Plug
.Product Dimensions: 5.4 x 4.3 x 2.6cm
.Product Weight: 50g
.Package Dimensions: 10 x 8 x 4cm
.Package Weight: 70g
.Packing: Bag
.Ages: 14+

Package Listing:

.1 x Oil Tank
.1 x Pulse CDI
.1 x Water Cooled Cooling Kit
.1 x Gasoline Pipe
.2 x Oil Pipe
.1 x Servo Tester
.1 x ESC

All Accessories

ENJOMOR GS-V8 Engine Model Ignition Starter and Water Cooling Kit

Flywheel Anodized Polished Engine Accessory for ENJOMOR Hit and Miss Engine Models

Fixed Base Set for ENJOMOR 6CC Hit and Miss Engine Models

4 AA Battery Holder with Switch HX2.54 Connector Specifically Compatible with MAD V8 Engine Model

Support Bracket for MAD V8 Engine Model (3D-Printed Black Material)

Spark Plugs for Hit and Miss Engine